PHD 250 1037EG C-Clamp With Locknut, 3/8 in Rod, 400 lb Load, Carbon Steel, Electro-Galvanized
Sku #84874301718
MFG #250 1037EG
Attributes
| Series: | FIG 250 |
| Load Capacity: | 400 lb |
| Material: | Carbon Steel |
| Rod Size: | 3/8 in |
| Suitable For Use With: | 4 in Pipe |
| Finish: | Electro-Galvanized |
- Low carbon steel with hardened steel cup point set screw
- When a torque wrench is unavailable, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added
- Underwriters laboratories listed in the US (UL)
- Caution should be taken not to over tighten the set screw
- 3/8 to 7/8 in set screws
- 60 in-lb torque set screw
- ANSI/SP 69/58 (Type 23)|Federal A-A-1192A (Type 23)|FM Approved|UL Listed