PHD 250 0062PL C-Clamp With Locknut, 5/8 in Rod, 550 lb Load, Carbon Steel, Plain
Sku #84874300282
MFG #250 0062PL
Attributes
| Series: | FIG 250 |
| Load Capacity: | 550 lb |
| Material: | Carbon Steel |
| Rod Size: | 5/8 in |
| Suitable For Use With: | 5 in Pipe |
| Finish: | Plain |
- ANSI/SP 69/58 (Type 23)|Federal A-A-1192A (Type 23)|FM Approved|UL Listed
- Low carbon steel with hardened steel cup point set screw
- When a torque wrench is unavailable, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added
- Caution should be taken not to over tighten the set screw
- 3/8 to 7/8 in set screws
- 250 in-lb torque set screw