Sku #05400712273
MFG #5323
Attributes
| Series: | 5300 |
| Cable Type: | Tape Shield/Unshielded/Wire Shield |
| Insulation Size: | 0.53 to 0.88 in OD |
| Voltage Rating: | 5/8 kV |
| Conductor Size: | 2 AWG to 250 kcmil |
| Splice Length: | 9 to 10 in |
- Fast and simple installation
- No torches or heat source required
- No special tool required to install splice
- THK walls to resist puncture and abrasion damage
- High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress
- Easy re-entry, can be used on cables with a rated operating temperature of 90 deg C and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connection for 1000 VAC and less cables sized 16 AWG to 500 kcmil
- Suitable for use with 30000 series copper compression lugs or other UL listed copper lug
- 365 V mil dielectric strength
- 750% elongation
- 1400 psi tensile strength
- 1-1/4 in L maximum bolt
- Polyethylene cable
- (9) Mastic Sealing Strips, (3) Pigtail Lug Covers, (3) Cold Shrink Tubes, (3) Rolls Scotch® 2200 Stress Control Tapes, (3) Bags of Solvent Cleaning Cloths, (3) Tubes of Silicone Grease, (3) Rolls Scotch® 130C Linerless Rubber Splicing Tape and (3) Instruction Sheets
- Splicing Motor Lead Cables to Incoming Feeder Cable Applications
- CSA Certified|RoHS Compliant