- Fast and simple installation
- No torches or heat source required
- No special tools required to install splice
- Thick walls to resist puncture and abrasion damage
- High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress
- Easy re-entry, can be used on cables with a rated operating temperature of 90 deg c and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 vac and less cables sized 16 AWG to 500 kcmil
- 5/8 kV shielded and non-shielded feeder cables sized 8 AWG to 500 KCMIL, polyethylene cable, cross-linked polyethylene cable (xlp), ethylene propylene rubber cable (epr), copper conductors
- 1-1/4 in maximum bolt length
- 1.2 in id lug cover
- 5.3 in lug cover length
- 1400 psi tensile strength
- 750% elongation
- 365 V/mil dielectric strength
- 1/case
- 0 AWG to 250 kcmil feeder cable, 2 AWG to 250 kcmil motor lead conductor size
- Designed to use with copper compression, 1-hole lugs
- Slip-on lug cover is made of durable EPDM rubber
- For splicing motor lead cables to incoming feeder cables applications
- (3) Pigtail Lug Covers, (3) Locking Pins, (3) Mastic Sealing Strip, (3) Tubes of Silicone Grease and Instruction Sheet
- RoHS Compliant|CSA Certified